Is it possible to output through an RS 232 or RS 422 port the diagnosis DGN values of an 18i-M machine? I need temperature values (DGN 308 and DGN 403)
Chapter 3 on the manual is about input/output of data but it doesn´t talk about DGN values.
http://www.repmatel.es/directorio/Ma...NUC/62445e.pdf
Thank you!
Results 1 to 1 of 1
-
12-07-2011, 11:26 PM #1
Registered
- Join Date
- Dec 2011
- Posts
- 0
Output Diagnosis DGN through RS 232
Reply With QuoteSimilar Threads
-
Need help with edm problem diagnosis - Hitachi 345Q
By genestapp in forum EDM Discussion General TopicsReplies: 2Last Post: 06-22-2012, 09:01 PM -
DIAGNOSIS
By tiberio in forum FanucReplies: 3Last Post: 06-22-2011, 01:24 AM -
Arc output - I,J,K or R's
By jcnewbie in forum Uncategorised CAM DiscussionReplies: 2Last Post: 10-07-2009, 11:32 PM -
Diagnosis Codes 6T
By swt-2009 in forum FanucReplies: 11Last Post: 08-24-2009, 03:35 PM -
Axis bypass procedure for diagnosis in 10M
By ranjankrana in forum FanucReplies: 4Last Post: 12-25-2007, 04:47 PM
Tags for this Thread
Posting Permissions
