584,865 active members*
4,913 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2007
    Posts
    6
    Hello guys!

    I had mill a pocket that was pivoted in the a-axes at 60 degrees.
    I set the a-axis at 60 degrees, equated the centre point to zero at x y z, programmed 5 axial high-speed cycle.
    The program works, but covering in the w axis isn’t axially parallel.

    Can anybody help?

  2. #2
    Hello Rapido!

    You have to write RX60.RZ0.G21 in isograph.

    Then call the high-speed cycle and program.

    Then the boring has to be 60° pivoted in the simulation of isograph.

    (rotation values always as head stands C is Z, a is X)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •