[leturc]

Hello everybody!

I’ve got the following trouble.

My index gu600 gave up the ghost after editing a unit. I checked up behind in the control cabinet. The whole nc unit was out of order. According to the information given by a technician, I should’ve shunted out the power supply unit.

This resulted in the following situation:

The plc unit glows red and can’t be reset.
The nc unit has two leds: the right one glows red and the left one blinks red.

Could anybody help???

Greetings

[leturc]

Already done….

I had a short circuit and all machine data got lost… certainly my not saved programs, too…..

Tough luck…

[kfarid]

Hello everybody!

I’ve got the following trouble.

My index gu600 gave up the ghost after editing a unit. I checked up behind in the control cabinet. The whole nc unit was out of order. According to the information given by a technician, I should’ve shunted out the power supply unit.

This resulted in the following situation:

The plc unit glows red and can’t be reset.
The nc unit has two leds: the right one glows red and the left one blinks red.

Could anybody help???

Greetings

Hi
Did you solve this problem
I got this problem and can't find how to solve it.