584,846 active members*
4,085 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Hello
    Can anybody help me?
    When burring slots with cycle 93, I can only define the point from one side.
    My problem is
    Starting point is Ø60 left of the slot and Ø62.5 right of the slot.
    How can I program it so that both sides are 0 degree?

    Thanks

    Regards Henk Bosscher (holland)

  2. #2
    Join Date
    Sep 2008
    Posts
    10
    Hello
    Can anybody help me?
    When burring slots with cycle 93, I can only define the point from one side.
    My problem is
    Starting point is Ø60 left of the slot and Ø62.5 right of the slot. How can I program it so that both sides are 0 degree?
    Thanks
    Regards Henk Bosscher (holland)


    Hello
    That only works when you enter the different from the left to the right diameter as a angle. (parameter STA1 in the support picture)
    Regards
    Guenter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •