Hello
I have to push a 6P9 Nut, 20mm flute lengths into a D25mm drill hole.
I am not sure how to program it! The tappets should take 0,05mm per stroke, drive in with 15000mm/min feed and drive out in rapid traverse.
When driving out, the tappets should lift out of the grove in X so that it doesn’t get stump.
The grove is 3,5mm deep (x direction) that means when I take 0,05mm per stroke then I have to make 70 strokes to reach the desired depth.
Can anybody explain me how to program that with a Mazatrol?
Really appreciate any kind of help!
Kind regards
Thomas
Thread: Mazatrol Matrix Nexus
Results 1 to 3 of 3
-
03-27-2012, 05:51 PM #1
- Join Date
- May 2011
- Posts
- 6
-
03-27-2012, 06:41 PM #2
- Join Date
- Jul 2005
- Posts
- 389
hello
You have to program it with convent. If you have to do it more often I would use an iso with macro variables.
Kind regards
Mazzi
-
03-28-2012, 09:05 PM #3
- Join Date
- Sep 2010
- Posts
- 42
@MillDrill: Mazatrol doesn’t work at all.
We often broach slots in different widths and depths with the holder from Horn. So I have in ISO a subprogram which is called in Mazatrol. Also the data is changed over variables.
If you don’t know to continue just give me a shout.
Reply With Quote
Posting Permissions
