584,802 active members*
4,791 visitors online*
Register for free
Login

Thread: Alarm 144

Results 1 to 6 of 6
  1. #1
    Join Date
    Aug 2007
    Posts
    208
    Hello guys
    I have a Haas VF3 with a Haas controller. Yesterday the following error message came up_
    ‘ALARM 144
    Machine will stop Functioning in 99,9 h
    Call Dealer for Unlock Code’

    I got a ‘Bill Code’ with my bill.
    Where do I have to enter it?

  2. #2
    Join Date
    Oct 2005
    Posts
    159
    Hello
    I have done it in the past and I think I remember the following:
    Enter emergency shutdown- setting/graph button- onto serial number- enter Bill code- press ‘write’- done!!

    Regards Ogelle

  3. #3
    Hello dekas
    The bill time code is entered with the serial number- usually you should have an instruction with it that tells you where and how to enter it.
    Regards Michael
    Gruß Michael<br><br><br><br>

  4. #4
    Join Date
    Aug 2007
    Posts
    208
    Hey

    I just can’t find the input box for the serial number- that’s my problem.
    I can change the name, the IP address and many others but no the serial number???

  5. #5
    The serial number is under setting no. 26- button Setgraph – General- no. 26

    Regards
    Michael
    Gruß Michael<br><br><br><br>

  6. #6
    Join Date
    Oct 2005
    Posts
    159
    Hello
    I had a look at work today. Approach reference point- open writing security (setting7)
    Emergency shutdown- serial number (setting 26) – enter bill code- write enter
    Close writing security- finished.
    Regards Ogelle

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •