[meistermoppel]

Hello
When I want to enter the program for example I drive with the hand wheel to Tool 3 and start the machine first in Run in Tool 2 then Z in action and then tool 3 is first changed and then here we go

How can I turn that off?

[KAMIE]

Good morning smile.gif

You have 2 possibilities:
1. Turn off Block search calculation. That has the disadvantage that you can only enter with the tool.
2. You enter under the set with the tool, then the machine does not undertake a tool change

The problem is that if you enter directly with the tool, the machine calculates the previous tool as well. Changes and then drives to the last position of that tool ( it’s the same when milling only the risk of collision is smaller.)

Greetings Michael

[ogelle]

Hello

Can you enter you program here please?
We have a 9 Haas machine and it normal to be able to start with the tool in the spindle. Block search calculation is enabled.

Regard
ogelle

[meistermoppel]

hello here is my little program:

O100
( DEMO-D )
( MAGAZIN: PRO-60 )
G54
( SURFACE )
( LFR12 )
G17 T01 M06
F300. S2500 M03
G90 G00 X91.876 Y71.9
G43 G00 Z1.0 H01 M08
G01 Z-5.0 F150.
G01 X87.928 F300.
USW.
G0Z2

T02 M06
F50000. S300 M03
G90 G00 X91.876 Y71.9
G43 G00 Z1.0 H02 M08
G01 Z-5.0 F150.
G01 X87.928 F300
USW

G53Z0
G53Y0
M30