584,842 active members*
4,224 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Hello
    Has anybody an instructions manual about parameter programming/ macro programming?

    Best regards
    Christian
    HAAS VF7 - BJ2008<br />HAAS ST20<br />HAAS ST10 mit Stangenlader<br />HAAS Mikron VCE1000<br />EMCO 365<br /><br />www.KDC-Technik.at

  2. #2
    Join Date
    Oct 2007
    Posts
    186
    Hello Christian
    Just get familiar with the handbook and when you don’t know how to continue then it’s best to ask a precise question about it. Generally the parameter programming on a Haas is as ‘easy’ as on any other CNC machine…

    It took me about 3-4 hours and a little bit ‘try & error’ to get familar with it.thumbs-up.gif

    Regards
    toadie

  3. #3
    Hello
    that’s exactly my problem. The chapter is missing in the manual or rather I don’t have a programming handbook.
    HAAS VF7 - BJ2008<br />HAAS ST20<br />HAAS ST10 mit Stangenlader<br />HAAS Mikron VCE1000<br />EMCO 365<br /><br />www.KDC-Technik.at

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •