Hello
Has anybody an instructions manual about parameter programming/ macro programming?
Best regards
Christian
Hello
Has anybody an instructions manual about parameter programming/ macro programming?
Best regards
Christian
HAAS VF7 - BJ2008<br />HAAS ST20<br />HAAS ST10 mit Stangenlader<br />HAAS Mikron VCE1000<br />EMCO 365<br /><br />www.KDC-Technik.at
Hello Christian
Just get familiar with the handbook and when you don’t know how to continue then it’s best to ask a precise question about it. Generally the parameter programming on a Haas is as ‘easy’ as on any other CNC machine…
It took me about 3-4 hours and a little bit ‘try & error’ to get familar with it.thumbs-up.gif
Regards
toadie
Hello
that’s exactly my problem. The chapter is missing in the manual or rather I don’t have a programming handbook.
HAAS VF7 - BJ2008<br />HAAS ST20<br />HAAS ST10 mit Stangenlader<br />HAAS Mikron VCE1000<br />EMCO 365<br /><br />www.KDC-Technik.at