Hello
Does anyone have a subprogram o macro for thread milling with MX45 (controller U-100L )?
Please!
Hello
Does anyone have a subprogram o macro for thread milling with MX45 (controller U-100L )?
Please!
Ein Butterbrot landet immer auf der Butterseite. Eine Katze landet immer auf den Pfoten. Was passiert, wenn man einer Katze ein Butterbrot auf den R
Hello hello
So I had to write the program myself
I clamped an ordinary thread boring bar as a tool.
It's not exactly brilliant, but it works.
G111 T8 H1 X0 Y0 Z50 S3500 F.2 K9
VC20=20(STARTPUNKT IN -Z)
VC21=26.44(GEWINDEDURCHMESSER HIER FUER G3/4")
VC22=25.4/14(STEIGUNG HIER FUER G3/4")
()
(AB HIER NICHTS AENDERN)
VC23=VC20
VC24=VC21/2
VC30=VC20/VC22
VC30=FUP[VC30]
VC30=VC30+1
()
G0Z=-VC20
G1 Y=VC24 G41
CALL OGEFR Q=VC30
G40
()
G0 X0 Y0 M9
Z100
M2
()
OGEFR
VC23=VC23-VC22
G3 Z=-VC23 I0 J=-VC24
RTS
Ein Butterbrot landet immer auf der Butterseite. Eine Katze landet immer auf den Pfoten. Was passiert, wenn man einer Katze ein Butterbrot auf den R