Hello
Iam new to mach3 and are a bit confused , When I try to zero my machine it just crashes into my home and limit switchs . all of my home and limit switchs work but it wont stop whne it hits them . Any ideas ?
Thanks
Thread: home problem with mach 3
Results 1 to 3 of 3
-
07-29-2006, 03:39 AM #1
Registered
- Join Date
- Jul 2005
- Posts
- 4
home problem with mach 3
-
07-29-2006, 04:04 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Why do you say they work? Do they work on the diagnostics screen?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
11-02-2012, 04:06 PM #3
Registered
- Join Date
- Dec 2007
- Posts
- 7
Homing problem - Good question
I have the same problem on a laser cutter. X and Y limit switches both work and show up in the diag screen correctly. I have home configured to use the same limit switches. When I home it, the axis just goes to the mech stops like it dose not recognized the limit/home switch.
Reply With Quote
Posting Permissions
