584,871 active members*
5,391 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2011
    Posts
    6
    Hi all

    Can someone explain how I can link programs with each other on the OSP-P200M (MB56-VA)?

    I have often series on the machine where a measurement program is carried out before the main program of the processing.

    Is there a way to link such programs together?

    Meaning that the sensor is taken in and the parts gets measured and afterwards the machines starts processing immediately

    It would be great if there is anyone who could give me some advice ....

  2. #2
    Hi Alex1986,

    Although I cannot understand you completely, I have an idea ... Usually there should be the possibility to store the measurement program as a subprogram and then
    call in at the corresponding position in the main program .
    After the successfull measuring, the machine continues ...

    I guess the guys from Hommel / Okuma may be able to help you immediately.

    regards
    McSti

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •