585,967 active members*
4,442 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Philips > Exchange 600E2 / reduction stage 500E2

Thread: Exchange 600E2 / reduction stage 500E2

Results 1 to 2 of 2
  1. 06-13-2008, 07:07 PM #1
    murrio
    murrio is offline
    Join Date
    Jul 2007
    Posts
    67
    Hello,

    I have 2 problems.

    The white plastic gear wheel at the Maho 500E2 is damaged.
    Should we pay attention to anything during installation of a new one?

    Is exchange of axes at Maho 600E2 with Phillips 436 managed similar to 500E2 with 436 controller?

    I would appreciate any help!

    Regards

    Mario
    Reply With Quote Reply With Quote
  2. 06-13-2008, 08:49 PM #2
    mtronik-kit
    mtronik-kit is offline Member
    Join Date
    Mar 2005
    Posts
    1513
    Hello,

    During exchange of gear wheels you should pay attention to setting of tappets. You should best turn the switching to the end position.

    Regards

    mtronik
    <a href='http://www.ersatzteilcenter.net' target='_blank'>Online ersatzteilcenter für Werkzeugmaschinen</a>
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules