585,908 active members*
3,644 visitors online*
Register for free
Login

Thread: Problem with data transfer

Results 1 to 3 of 3
  1. 07-06-2009, 06:31 AM #1
    gabba
    gabba is offline
    Join Date
    Jun 2009
    Posts
    2

    Post

    Hello forum!

    We’ve got a problem with data transfer from pc to CNC with controller Philips 432. Transfer to PC works, but there’re only 10 clauses transferred from PC to the machine.
    We use the program V24 for transferring.

    Settings:
    Baud rate 4800
    Equality from
    Data bit 7
    Stop bit 1
    Handshake rts
    Timeout

    Is it possible to change the settings in the machine? If it is, then where?

    Thanks in advance

    Greetings gabba
    Reply With Quote Reply With Quote
  2. 07-06-2009, 07:32 AM #2
    mtronik-kit
    mtronik-kit is offline Member
    Join Date
    Mar 2005
    Posts
    1513
    Hello

    Check the parameters of handshake controller. Does an error occur in case of abort or does the controller just stand still?
    Driver modules of the handshake controller are probably damaged. You can switch to software handshake (XON/XOFF), and then the modules won’t be activated.

    Greetings mtronik
    <a href='http://www.ersatzteilcenter.net' target='_blank'>Online ersatzteilcenter für Werkzeugmaschinen</a>
    Reply With Quote Reply With Quote
  3. 09-28-2010, 10:27 PM #3
    milanlapovo
    milanlapovo is offline
    Join Date
    Aug 2010
    Posts
    5
    Hallo,

    i had the same problem like you had. Can You tell me what was the problem.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules