584,837 active members*
5,425 visitors online*
Register for free
Login
Results 1 to 7 of 7

Hybrid View

  1. #1
    Join Date
    Aug 2008
    Posts
    5
    Hello

    Does anybody have a machine parameter list for the machine Maho MH900C with cnc432 controller?

    At the moment I need the complete parameter list and I'd like to buy a service/parameter manual for this controller.

    Regards,
    Mikko

  2. #2
    Join Date
    Apr 2017
    Posts
    7
    someone has the machine parameters for machining center MAHOMAT cnc 432?
    thanks.

  3. #3
    Hi;
    I have a boehringer vdf 250 c with a cnc 32bt controller . During diagnostics one of my IO cards is detected and five no fault , but it gives all I and O are on 0 even if they are on 1 .
    I switched cards , the same probleme with another card at same position.

  4. #4
    Join Date
    Jun 2019
    Posts
    1
    Hi. Is it possible to set a soft start and a spindle stop somewhere in the parameters? (Continuous). I have a MAHO 600 with Philips 432. It has an Indramat A31 frequency converter. When it runs at about 1000 rpm. , and turn off the spindle, it stops immediately when it hits. Thanks for help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •