584,871 active members*
5,052 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2005
    Posts
    5
    Hello at all,

    I work with a maho MH600E milling machine with Philips 432 and of course with Command Station. This stuff isn't really handy.
    Therefore I am looking for a possibility to attach a handwheel at this controller. Dis anybody managed it? Is it possible? If not, where is the problem?

    Greets,
    Daniel

  2. #2
    Hello Kostner,

    Basically no problem.
    The round cable has to lead to the right place into the switch board. Somewhere left at the back, where the cable conduit leads leads into the control panel.

    The connector of the hand-held device is on the left on the Telex-card, where the control panel is actually in.

    Please swich off the machine beforehand!

  3. #3
    Join Date
    Dec 2005
    Posts
    5
    Hello Wolfgang,

    I have to define my information.
    My controller is 432/10 and I wouldlike to attach a handwheel with TTL signals - means line A,B. Is that possible?
    Greetings,
    Daniel

  4. #4
    Hy!

    How can the handwheel be activated?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •