Hello
I've bought a 500C Maho with the CAM program OneCNC XR3.
The program has a memory of 24kb but it is still a bit too small.
Therefore, I bought a 1mb memory card PN :4022-226-2340, does someone have any experience with this?
Do I need to change the constants, so the card can be detected? If so which ones? Unfortunately I have no legend of the constant....
I have the software version6 097/405. Is it possible to get the current version?
Thank you very much
greetings
Steffen
Results 1 to 2 of 2
-
01-06-2012, 06:58 PM #1
- Join Date
- Apr 2010
- Posts
- 3
-
01-25-2012, 01:33 PM #2
- Join Date
- Oct 2007
- Posts
- 123
Hi Steffen
I hope you did not spent too much money on it. As far as I know, the memory card 4022 226 3340
equipped with 1Mb only runs from a 10Mhz CPU hence from software version V600 onwards
I am sure that the DMG guys can get you a clear text of machine constants....
An upgrade is only possible if you can have the necessary parts (CPU and software).
greetings
Reply With Quote
Posting Permissions
