584,805 active members*
4,987 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Hello guys

    I am so desperate!!!
    Can anybody tell me how to save/call a written program? I am a newbie and I need some help.

    I friend of mine wrote me a program yesterday on place N9001 and save it.
    I just can’t call/save the newly written program (N9002) .

    I am so thankful for any help
    Thank you in advance

    Patta

  2. #2
    Hello don’t you have any documents about the machine/controller?
    (is it the machine or do you just done know how to do it?
    Regards

  3. #3
    Hello

    I did not get any document with the machine (Maho MH 600 E with Philips 432 controller; year of manufacture 1988).
    The recently bought the machine as a defect from a small milling firm for a very cheap price.
    After several starting problems like puffer battery was broken, screen was defect, gear wheel defect... i would like to work with it now.

    My CNC knowledge is based on my apprenticeship from 1985.1988.. so i was a very long time ago.
    An acquaintance of mine is pretty familiar with the controller but I don’t want to ask him about small things. I had a look if there are any training courses available where I live (91301 Forchheim Germany) but I couldn’t find anything..

    Can anybody help me out with my problem?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •