585,578 active members*
4,046 visitors online*
Register for free
Login

Thread: MH700C

Results 1 to 3 of 3
  1. 03-11-2012, 06:09 PM #1
    TomE2
    TomE2 is offline
    Join Date
    Mar 2012
    Posts
    9
    Hello everybody
    I have bought the MH700C. So far the machine was running without problems.
    However since yesterday the machine just stops in the middle of the program and the following error is displayed: ERR 01, 05.
    01 = interface cut off
    05= emergency stop of the machine
    On the warning device, the number 54 gets displayed ( unfortunately I don’t have an error list for it)

    I have already filled up oil in the hydraulic system and the lubrication system.

    Would be great if somebody could help me out...

    Kind regards
    TomE
    Reply With Quote Reply With Quote
  2. 03-11-2012, 06:39 PM #2
    mtronik-kit
    mtronik-kit is offline Member
    Join Date
    Mar 2005
    Posts
    1513
    Hello
    Unfortunately I don’t have the required circuit plan either but on the 300C i get the error message 1Q1, motor protection main motor fan.. you could have a look at that..

    Regards
    Mtronik
    <a href='http://www.ersatzteilcenter.net' target='_blank'>Online ersatzteilcenter für Werkzeugmaschinen</a>
    Reply With Quote Reply With Quote
  3. 03-11-2012, 06:42 PM #3
    TomE2
    TomE2 is offline
    Join Date
    Mar 2012
    Posts
    9
    Thank you I will check that tomorrow thumbs-up.gif
    Fan of the main motor, would that be the spindle motor???
    Regards
    Tom
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules