[mantelwinkel]

Hello,
this is my first time here in the forum.
Please be patient, after 20 years working at lathe operator I have to learn a new controller TX 8D and TX 8F at TNA.
My problem is, that I found Macro with addresses and arguments in the documents, but the descibtion is not that much informative.
A;B;C;D;E;F;H;I;J;K;M;P;Q;R;S;T;U;V;W;Y;Z - some I unerstand - could anybody help me, please?

Thanks.

[Die Traub-Experten]

To describe all, would be too much. Do you have the user manual TX8D? If you do, have a look at

Chapter B 6.2 - Macro.

If you don't have any manual, write a pn with your e-mail-address, so I can mail you something.
Greets,
DTE