585,660 active members*
3,258 visitors online*
Register for free
Login

Thread: Cut a slot

Results 1 to 2 of 2
  1. 02-22-2011, 05:58 PM #1
    ruben
    ruben is offline
    Join Date
    Feb 2011
    Posts
    3
    Hello users,

    since a week I am working with TNA 300 with TX8H controller. Beforehand I 'studied' for 2 months the Siemens controller.
    Now I am not able to program a slot with G248 cycle.
    I always got the message (at main menue): ''subprogram not found''.
    Could anyone show me an example, how this could be done?

    That would be great. Thanks in advance!

    r.rubens
    Reply With Quote Reply With Quote
  2. 02-22-2011, 06:36 PM #2
    Weber Josef
    Weber Josef is offline
    Join Date
    Apr 2007
    Posts
    62
    Hi , ruben !

    you gotta have the UP 9848 (Edit) at the machine - otherwise it couldnot be found!
    Programming technique at the 2nd page 4.58
    Neutral subprogram with L501 up to L522
    O 9848 for machine

    Attention: tool calibrated two times!!!

    Greetings,
    Josef
    Wissen ist Macht &#33;<br>nichts wissen macht auch nichts &#33;
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules