584,837 active members*
4,895 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Index and Traub > TND 400 TX-8F program run from the computer
Results 1 to 2 of 2
  1. #1
    Hello everybody

    I would be interested to know if it’s possible with the TX-8F to transfer the program in blocks from the PC.

    I know that system from our Heidenhain controller : the transmission starts on the PC and I only confirm it with the NC start button on the machine.

    I would need this block transmission due to the program size.

    I already have a memory extension, but it’s still not enough! sauer.gif

    Many thanks for your help.

  2. #2
    Hello again
    I haven’t found out anything. There was supposed to be a program called WOPCOM that was able to do it, but it only works under DOS.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •