584,863 active members*
4,980 visitors online*
Register for free
Login

Thread: PC-error 10

Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2007
    Posts
    4
    Hello,
    My Traub TNS65 with TX8D controller always displays the PC errors 10. Does anyone know about this? Does the card need to be replaced and can the error be eliminated?

  2. #2
    Error no. 10 is a validation error of the memory card FX15, which controls the PC functions. Sometimes it is sufficient to pull the card out again and re-insert, of course when the NC is switched off, because it makes such a thing due to contact problems.


    If nothing works, a replacement will be required. Sign up via PM with us.

    good luck
    <span style='color:green'><span style='font-family:Arial'>Wenn dich jemand um eine Information bittet, dann will er nicht deine Meinung hören.</span></span>

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •