584,858 active members*
4,594 visitors online*
Register for free
Login

Thread: TX8 i

Results 1 to 3 of 3
  1. #1
    Hello
    In my firm we have a new TNA 400 with TX8i controller for 3 months now.
    So far so good- the Traub is very setup friendly as always and the machine is also good so far.
    But the programming on the mash... oh my god!
    The old F or H controller was a lot quicker than this one....
    I think I am going crazy.. it takes ages until a new program is finally running...
    I can year the Gildis laughing already!
    Wissen ist Macht &#33;<br>nichts wissen macht auch nichts &#33;

  2. #2
    Hello
    I know that from somewhere. Compared to the solution or the powerlines, the TX8i is quite a “granddad” of all of the controllers. I am fighting with that problem for over 4 years now but luckily we bought the MMi as a PC version as an addition to the machine- with that the programming is actually bearable and one can work quite fluently with it!

    What controller have you got? The old one with 300 MHz processor or already the new one?

  3. #3
    In my old firm we also had a TNA400 with the TX8i, it was terribly slow (win95 in the background!!!!)
    I hardly ever used the simulation, it just took way too long.
    I am now working on a DMG with SolutionLine... a completely different world..

    Regards
    darkvoice

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •