584,812 active members*
5,395 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2012
    Posts
    36
    Hello

    thank you for entering in my post

    I'm making programs with iTNC530 programming station, but i can't find a taping cicle

    If I press cicle def > drilling/thre,
    and I have 7 different cicles for drilling (or similar operation) but I have no taping cicles

    where can I find a taping cicle?

    thank you in advance for your help

  2. #2
    Join Date
    Dec 2001
    Posts
    5151
    Quote Originally Posted by arenamember View Post
    Hello

    thank you for entering in my post

    I'm making programs with iTNC530 programming station, but i can't find a taping cicle

    If I press cicle def > drilling/thre,
    and I have 7 different cicles for drilling (or similar operation) but I have no taping cicles

    where can I find a taping cicle?

    thank you in advance for your help
    Hello arenamember,

    threading cycles you'll find on second softkey bar:
    [attachment=12790:Threading_Softkeys.jpg]
    Click on second stripe in line. When it's active it changes to blue...
    Attached Thumbnails Attached Thumbnails Threading_Softkeys.jpg  
    <b>Gruß / Regards</b><br /><i><b>CNCFanatiker</b></i><br />AdminCrew<br /><br />Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.<br />If we always this act what we are able to do, then we always remain what we are.

  3. #3
    Join Date
    Dec 2012
    Posts
    36
    Dear CNCFanatiker

    "threading cycles you'll find on second softkey bar:
    Click on second stripe in line. When it's active it changes to blue..."

    I have an oblique arrow on the bottom right of the control panel, but when I click on it, it comes back on previous softkey bar :-(

    I don't have that softkey bar you sent me on the picture

  4. #4
    Join Date
    Dec 2012
    Posts
    36
    Thank you CNCFanatiker

    it works ignore my first reply

    I've found it now it works thank you very much indeed !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •