Hey guys
I have another question or rather I need a program.
I currently have cast pasts on the machine which are very badly to touch due to their quality.
The position always varies a little bit.
I want to process them like that:
Clamp part with pens to strike. Get neutral point and enter values ( pink drill hole)
Then approach the twisting (red drill hole)
Read it out with FN18
Calculate with the correct twisting ( with CAM)
Back into standard twist and process.
I need a program for the future. We often have such parts...
Sometimes the fixture construction is more complicated than the processing.
Thats why its not all bad.
Thank you!!
<b><!--sizeo:5--><span style="font-size:18pt;line-height:100%"><!--/sizeo-->Gruß General<!--sizec--></span><!--/sizec--></b><br /><br /><br /><br /><!--sizeo:3--><span style="font-size:12pt;line-height:100%"><!--/sizeo--><b>Fräser sind Halbgötter in Blau.<br />Denn sie lassen durch Zerstörung Neues entstehen!!!!</b><!--sizec--></span><!--/sizec--><br /><br /><br /><!--sizeo:2--><span style="font-size:10pt;line-height:100%"><!--/sizeo--><u>Werbung in eigener Sache:</u><!--sizec--></span><!--/sizec--><br /><i><!--sizeo:2--><span style="font-size:10pt;line-height:100%"><!--/sizeo-->Enter the Matrix an feel the Moment "<u>www.pixxelmatrix.de</u>"<!--sizec--></span><!--/sizec--></i>