584,863 active members*
4,750 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Hello
    I want to convey my pieces over the C-axis and then touch the zero point in X and Y (with TCH Probe).
    Then save the zero point in the preset table
    What’s the course of action for this process?
    Unfortunately I have no manual? ?
    @ FrankMa

  2. #2
    Join Date
    Dec 2001
    Posts
    5151
    No manual? - No problem there you can download it-

    http://content.heidenhain.de/doku/tnc_guid.../670_388-20.pdf

    ... or simply use the help function on your controller.

    Look TouchProbe cycle 403 and possibly also at cycle 419
    <b>Gruß / Regards</b><br /><i><b>CNCFanatiker</b></i><br />AdminCrew<br /><br />Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.<br />If we always this act what we are able to do, then we always remain what we are.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •