584,837 active members*
5,380 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Hello everyone!

    It’s about a DMF 260/7 with X Y Z B C axis and 3D measuring probe.
    Is there a possibility to touch several points on the face and if the difference of these points in Z is giver than 0,05mm then the processing is automatically stopped/ or an error message is released.

    Regards Lucas

  2. #2
    Join Date
    Sep 2008
    Posts
    2312
    Hello

    Try and use cycle 427 consecutively.

    The first touch point is the conductance ( saved in Q160)
    Q60 = Q160; buffer conductance
    Q61 = Q60 + 0,05 ; tolerance above
    Q62 = Q60 - 0,05 ; tolerance below

    Then you add the tolerance values after.
    Gruß<br /><!--fonto:Comic Sans MS--><span style="font-family:Comic Sans MS"><!--/fonto-->Schwindl<!--fontc--></span><!--/fontc-->

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •