584,817 active members*
5,140 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    May 2007
    Posts
    24
    Hello people

    I've got a problem.
    Can I transfer data with TNC Cremo from a MillPlus controller to a laptop?
    Or do I need another software? If so which one?
    Hope someone can help me.
    We only had TNC 530 for a very long time and are complete new to MillPlus.
    Thanks for your help.

    regards

  2. #2
    Join Date
    Dec 2001
    Posts
    5151
    hello machining,

    yes should be possible - for more info cast a look in the help of TNCremo and search for the function overview.
    Also> HEIDENHAIN CDS Lite <should be suitable.
    <b>Gruß / Regards</b><br /><i><b>CNCFanatiker</b></i><br />AdminCrew<br /><br />Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.<br />If we always this act what we are able to do, then we always remain what we are.

  3. #3
    I can recommend CDS Lite, I use it on a DMU 80T with Mill Plus controller and have made really good experiences with it...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •