584,800 active members*
4,637 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2006
    Posts
    52
    Hello

    How can the Mill Plus carry out traverse paths in a circular way when doing pitch circle holes?
    All paths are going straight on our machine.

    Best wishes Fred

  2. #2
    Join Date
    Aug 2007
    Posts
    411
    Hi,

    You probably have to replace the pitch circle cycle by a Macro. You just have to program between the G79 and G2/3

    Regards eckitsch.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •