584,798 active members*
4,259 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2007
    Posts
    47
    Hello

    We have a DMU 50v with Millplus v400.

    I have the following problem:

    Over the tool magazine is the air nozzle which blows off the magazine in particular intervals.
    On our machine it’s every 20 seconds. We have found the value in the machine constants but we can not change it somehow..

    So my question: how can I change that value?

  2. #2
    With our DMU125P you first have to flick a switch in the switch cabinet. You find it with 2 further switches for emergency operation and end bridging operation..
    Regards

    Michael

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •