[fred-6]

Hello guys

I don’t have much experience with Sinumerik 8M and I’ve got the following problem.
I’d like to call a main program in another main program.
So not a subprogram!

Is it possible?

The background is as follows: a friend of mine has bought a used Hüller Hille with two palettes and Sinumerik 8M.
And he’d like to attach a main program to each palette in order to be able to machine different parts with two or one palette.

Regards, Fred

[InTex]

Hello

I can’t say much about 8M. In case of 8T, I made it as follows.

It should work in the same principle.

N480 G0 G53 X400 Z500 D0 C0 T0
N490 G95
N500 %98
N510 M71
N520 M2

[fred-6]

Hello

I can’t say much about 8M. In case of 8T, I made it as follows.

It should work in the same principle.

N480 G0 G53 X400 Z500 D0 C0 T0
N490 G95
N500 %98
N510 M71
N520 M2

Hello

Thanks for the rapid answer.

I’ll test it tomorrow and I’ll give my feedback.

Regards, Fred