Hello everybody,
I have a question about engraving/ marking of production details.
I work at a Hermle C600 U with Siemens controller 840 D ( Shopmill )
We have large-scale details that we have to mark with consecutive numbers before manufacturing. For example 1234 ---> 1235 ---> 1236
How can I make it automatic?
For example
1. insert a detail
2. start the processing
3. mark the detail with 1234
4. detail out
5. detail in
6. start the processing
7. mark the detail with 1235
So that it always marks with consecutive numbers despite the same program.
Is it generally possible?
Would be glad about suggestions.
Thanks