hi guy.. somebody please help me..
my final project is fabricate car side mirror.. the problem is, whn i try running using sinumerik at pc (sinumerik pc suitable software).... the g code cannot be simulate, the srceen display "channel 1 selected program C:\ SI_TRAIN\DH\WKS.DIR\SHOPMILL not available or is e* "
I also don’t know to transfer g-code to machine.. I connect the pc (same comp. name load-in in machine) by USB, but machine cannot load in.
i tried since 2 month but still failed.. if you kindly.. you can try my G-code.. may be some thing wrong with my G-code
;================================================= =====
;=== cPost Standard PP for SINUMERIK 840 D ===
;================================================= =====
N10 G0 G90 G40
N20 G40 M8
N30 G17
N40 ;=============== TOOL CHANGE =================
N50 ; DESC :
N60 ;=============================================
N70 T1 M06
N80 D1
N90 G0 G90 G40 G17
N100 F0 S0
N110 G64 SOFT
N120 G0 X234.204 Y-167.9 Z100.971 S70 M3
N130 G0 Z2.553
N140 G1 X240 Z1 F300 G94
N150 X0.01 F1000
N160 Y-164.9
N170 X239.99
N180 Y-161.9
N190 X0.01
N200 Y-158.9
N210 X239.99
N220 Y-155.9
N230 X0.01
N240 Y-152.9
N250 X239.99
N260 Y-149.9
N270 X0.01
N280 Y-146.9
N290 X239.99
N300 Y-143.9
N310 X0.01
N320 Y-140.9
N330 X239.99
N340 Y-137.9
N350 X0.01
N360 Y-134.9
N370 X239.99
N380 Y-131.9
N390 X0.01
N400 Y-128.9
N410 X239.358
N420 X239.99 Y-125.9
N430 X0.01
N440 Y-122.9
N450 X239.99
N460 Y-119.9
N470 X0.01
N480 Y-116.9
N490 X239.99
N500 Y-113.9
N510 X0.01
N520 Y-110.9