Hello!
I want to tap 10mm over the middle axis with a turning machine. Can anybody tell me the required commands?
Thank you
TIM
Thread: Siemens 810D
Results 1 to 6 of 6
-
03-04-2012, 03:13 PM #1
- Join Date
- Nov 2009
- Posts
- 10
-
03-04-2012, 03:49 PM #2
- Join Date
- Feb 2007
- Posts
- 4191
Sparsely details!!!
How deep?
What Z-position?
With or without compensation chuck?Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />
-
03-04-2012, 04:12 PM #3
- Join Date
- Nov 2009
- Posts
- 10
about 12 mm deep without compensation chuck, the problem is that its not processed from the model axis but above it..
-
03-04-2012, 04:19 PM #4hapo Guest
That only works with a real Y axis:
G19
T="GEW_M10_RAD" D1
SPOS=0
M2=3 S2=300
DIAMOF
G0 X50 Y10 Z-10 ;pre-positioning
G97 G95
CYCLE83(50,30,1,,10,0.2,3,,0.5,0,300,500)
DIAMON
G0 X500 Y0 Z500
G18
.. but don’t forget to drill the core hole beforehand
-
03-04-2012, 04:20 PM #5
- Join Date
- Feb 2007
- Posts
- 4191
So axial in X10?about 12 mm deep without compensation chuck, the problem is that its not processed from the model axis but above it..
Where is the problem?
Are AGW(workplace limit values) available?
Ah- so radial offset in Y 10mmEine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />
-
03-04-2012, 04:24 PM #6
- Join Date
- Nov 2009
- Posts
- 10
Unfortunately nothing is available!
Reply With Quote
Posting Permissions
