584,862 active members*
5,523 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2004
    Posts
    56
    Hello everyone

    I want to take the mean of a component part with a 840 DSL controller with the help of measuring cycles....

    What do I have to do? The component part is 700mm wide and I wanted to measure 4 points and take the middle...
    I wanted to use measuring cycles and if it’s possible not the 1-point measurement cycle 978

    Would be thankful for any kind of help

    Kind regard

  2. #2
    hapo Guest
    If you have a 840Dsl, then I am sure ShopMIll is installed.
    In Shopmill all thinkable measuring cycles are provided.
    Why do you want to play with DOS, if you want to use Win7?
    Or have a look in the manual measuring cycle in DOCONWEB.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •