Hello CNC community
The spindle man is back and is annoying you with stupid, almost impossible ?? questions =)
Are there any program commands or features to create oval - ellipse- shaped component parts on a turning machine? ( or on a turning machine with milling option)????
Possibly with degree inscription of the spindle axis and synchronization of a user- defined working axis??
I’m excited to read your answers!!!????!!
Regards
Thread: turn oval ellipse with a 810/840
Results 1 to 4 of 4
-
09-02-2011, 06:00 PM #1
Junior Member
- Join Date
- Mar 2003
- Posts
- 75
-
09-02-2011, 06:24 PM #2
- Join Date
- Feb 2007
- Posts
- 4191
To take your tension away, I can tell you YES, it exists!
It’s nothing new either.Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />
-
09-03-2011, 01:23 PM #3
Junior Member
- Join Date
- Mar 2003
- Posts
- 75
Hello
That’s already good news. Could somebody tell me how and where can I find information about it??
I always like video instructions too….
Or is the job done with 2 commands??? That would be too easy..
Regards
-
09-03-2011, 02:25 PM #4
- Join Date
- Feb 2007
- Posts
- 4191
Hello
A software regulates now all that, that used to be done by a mechanism like Oval Chuck on an oval turning machine like the ODSM30.
Regarding ellipse milling on a turning-milling centre- it’s an older subject and no rocket science.
There is something like Polypath on the 840D. It’s all explained in the manual under working preparation.Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />
Reply With Quote
Posting Permissions
