I mean I am not an expert with Sinumerik but in the end it’s the same on all controllers.
You program a point that you want to chamfer with G01 and approach it. Then you define the chamfer radius on the controller and approach the next point. That only works with most controllers when you entered 2 coordinates- however that has changed now because when a coordinate is missing, then the controller can read out the current position of the non-moving axis.
That’s also true for the Sinumerik, isn’t it????
<b><!--sizeo:5--><span style="font-size:18pt;line-height:100%"><!--/sizeo-->Gruß General<!--sizec--></span><!--/sizec--></b><br /><br /><br /><br /><!--sizeo:3--><span style="font-size:12pt;line-height:100%"><!--/sizeo--><b>Fräser sind Halbgötter in Blau.<br />Denn sie lassen durch Zerstörung Neues entstehen!!!!</b><!--sizec--></span><!--/sizec--><br /><br /><br /><!--sizeo:2--><span style="font-size:10pt;line-height:100%"><!--/sizeo--><u>Werbung in eigener Sache:</u><!--sizec--></span><!--/sizec--><br /><i><!--sizeo:2--><span style="font-size:10pt;line-height:100%"><!--/sizeo-->Enter the Matrix an feel the Moment "<u>www.pixxelmatrix.de</u>"<!--sizec--></span><!--/sizec--></i>