Controller : Siemens 810D
Machine: turning machine EMCO TURN 365
Hello
I try to get my EMCO running but the problem is that the spindle simply doesn’t start.
When I write a simply program without spindle, then the machine carries out the movements.
However when programming the spindle then I get the message “wait for spindle” and the machine stands still and just waits for the spindle. But as the machine has powered tools,the spindle should be settled. So the spindle should also be referenced but the machine doesn’t do that. It approaches both axes and then turns the tool changer. Then 3 out of 4 axes are referenced. The spindle axis C is not referenced. However when I turn the spindle manually then the REF signs appears at some point.
What am I doing wrong? I have programmed the spindle like this: T1 S1=500 M3
The values is also taken into the target-display so I think it’s correct..
Thank you for your help.