584,798 active members*
4,246 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2005
    Posts
    93
    Hello
    I’d like to use the second line of the output of the MSG instruction.
    Is it possible to use the second line directly?
    I tried to make it with “%n” or with counting of symbols. It doesn’t work because there’s no proportional font used.

    Regards

  2. #2
    Join Date
    Jul 2009
    Posts
    9
    Good evening
    Well, the controller divides a message automatically if it has more than 62 symbols. There’re maximally 124 symbols allowed for a message, so 2x62 symbols. So just enter so many spaces in the first line that you’ll come into the second one…

    Regards, guschdel

  3. #3
    Join Date
    Mar 2005
    Posts
    93
    Hello

    It would work this way at our Embedded. But the font of the Advanced isn’t proportional. So that I can use more “I” in the first line than “W”.
    I don’t know how I may/can change the font.

    Regards

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •