584,857 active members*
4,670 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2005
    Posts
    30
    Hello

    I want to start off with a measuring sensor on a component part that is onto a wave ( with a turning machine and 840d controller) and then give the highest point to the controller as a spindle position 0 degree.

    Can anybody help me out?

    Thank you!

  2. #2
    What do you mean? Automatically with a cycle or a manual start off with the sensor and NP shift in C?
    Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />

  3. #3
    hapo Guest
    Is it a kind of switch cam that you want to adjust?
    With such a measurement, the geometry of the curve is quite important.
    Maybe you can post a sketch...

  4. #4
    hapo Guest
    What kind of sensing device should I use? A switching sensing device or a measuring probe with an own metering shaft???

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •