584,826 active members*
5,175 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Hello,
    interpolation turning on a 840 D is no problem- but what about doing it on a 830 C?

    Does anybody know about it?
    Thanks
    Jim5062

  2. #2
    Hello,
    If you mean the circular interpolation then there is no difference!
    Give us a bit more information so we can help you.
    Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />

  3. #3
    Join Date
    Jul 2003
    Posts
    256
    Hello,
    Well I believe its works: switch spindle to axle operation and go ….

    With the 840 D the turn is an easy thing, on the C it’s a lot more effort to program it.
    It’s best to program it over a repetition loop, then you can change settings easier.

    Unfortunately we don’t have a 840 C anymore, otherwise I could have helped you.
    Greetings Werner

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •