Hi, we have a horizontal Huyndai at my work, and we program it with Gibbscam.
The offsets is now generetad by G58 after every tool change, is it possible
to set it using R-parameters?

On an WFL Millturn i previously worked in, it was don by a cycle called L998

Example, at the start of a program:

L998 R1=102 R2=332 (G54) (The 332 value is the offset in mm and 102 is G54)

Is it possible to program sutch sub program for our machine? The G58 has to be
programmed, and its a perfect case for errors.