584,814 active members*
5,207 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2004
    Posts
    28
    Hello

    I’m looking for a possibility to mill company logos with ShopTurn at our CTX. At the moment there’re only 2 cursive letters but the engravingy cycle of Shopturn is kind of limited.
    Does anybody have an idea what the best way is to do that?

    By the way, how is line break made in the engryving cycle?

    Greetings
    Steph

  2. #2
    Hello

    I wouldn’t use the engraving cycle of ShopTurn therefore; I’d rather make it milling front side.

    Create the contour with G-code and write the program in Din.
    Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •