584,829 active members*
5,121 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2007
    Posts
    402
    Hello

    Is there a possibility to program this cut-in (see attachment) with help of “cut-in cycles” in Shop Turn? Side faces are either “straight” or they continue in a certain angle up to the cut-in depth. How can it be combined?

    Thanks a lot

    Regards, vitra26

  2. #2
    Hello

    There’re several possibilities. The first one is usage of cut-in cycles. But id doesn’t make sense.

    Things like that are made with prick turning above the contour.

    Regards, InTex
    Eine Schraube ohne Gewinde ist ein Nagel<br /><br />Grüsse aus dem Harz - InTex<br />

  3. #3
    Join Date
    Sep 2007
    Posts
    402
    Hello InTex

    Thanks a lot for your help. I’ll try that out.

    Regards, vitra26

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •