584,817 active members*
4,676 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Hello fans, freaks and those who know everything about ShopTurn!

    Unfortunately, I know that input masks don’t accept any R-parameters. But how is it possible to use the data programmed in separate work steps (like diameter, length, angle, X1 X0 etc.) in a DIN-line? Where are they stored?

    Greetings from mountains and thanks in advance
    Franz

  2. #2
    Karlsson Guest
    Hello and good morning

    The R-parameters aren’t enabled under ShopTurn. Only in the pure ShopTurn/ DIN ISO.

    Greetings

  3. #3
    Join Date
    May 2007
    Posts
    374
    Hello and good morning

    The R-parameters aren’t enabled under ShopTurn. Only in the pure ShopTurn/ DIN ISO.

    Greetings
    Hello

    Here is an example for editing with R parameters

    Regards, Fred

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •