585,735 active members*
4,590 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > PowerMILL > Roughing from the outside to the inside

Thread: Roughing from the outside to the inside

Results 1 to 4 of 4
  1. 10-13-2009, 06:41 PM #1
    Kreuzritter
    Kreuzritter is offline
    Join Date
    Aug 2009
    Posts
    6
    Hello everybody

    I’ve got a problem. I have to rough a lot of material away in the middle where something stays vertically.
    I want Powermill to begin from the outside and move to the inside. But doesn’t matter what I set, Powermill always begins in the middle. Clear 3D, model: contour.

    Could anybody suggest anything?
    Reply With Quote Reply With Quote
  2. 10-14-2009, 06:49 AM #2
    oldmartin
    oldmartin is offline
    Join Date
    Oct 2004
    Posts
    786
    Hi Kreuzritter

    Show us a picture of the model.
    It’s hard to say anything without it.

    Greetings
    Oldmartin
    Reply With Quote Reply With Quote
  3. 10-14-2009, 07:03 AM #3
    Kreuzritter
    Kreuzritter is offline
    Join Date
    Aug 2009
    Posts
    6
    Hello Oldmartin

    Here is a picture of the mask.
    Reply With Quote Reply With Quote
  4. 10-14-2009, 08:06 AM #4
    oldmartin
    oldmartin is offline
    Join Date
    Oct 2004
    Posts
    786
    Well, my suggestion is:
    Order – pocket
    Direction – automatic
    Maybe you also should set the check mark by spiral form.

    Greetings
    Oldmartin
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules