585,753 active members*
3,645 visitors online*
Register for free
Login

Thread: Cimco V6

Results 1 to 2 of 2
  1. 12-06-2011, 05:26 PM #1
    Cncplaner
    Cncplaner is offline
    Join Date
    Dec 2011
    Posts
    152
    Hello
    Can you give me some help with the machine setup- unfortunately my machine G550 is not in the setup selection.

    Maybe one of you has already configured this type of machine?
    I would be very grateful for your help.

    PS: As I said, I do everything after each other, I'm taken your hard but justified words to heart and after two sleepless nights, I just have to give in that you are right.

    And I begin first with small rolls: Today I swapped the 120 for a 160 PCD milling cutters and customized the travel paths without SRK.
    The cutter 80 has simply taken too much time but it was just a dodge tool.


    Can anybody help me out?
    <b></b>Vielen Dank f
    Reply With Quote Reply With Quote
  2. 12-08-2011, 04:05 PM #2
    Cncplaner
    Cncplaner is offline
    Join Date
    Dec 2011
    Posts
    152
    Can anybody help me out?
    <b></b>Vielen Dank f
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules