584,863 active members*
4,766 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Drilling- and Milling Machines > Gildemeister CT40 enable lamps SFD don’t glow
Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2006
    Posts
    4

    Post

    Hello

    After a long standstill of my Gildemeister CT40, enable lamps S and D don’t glow. F started glowing after 5 minutes, so the manual feed works again. Turning the machine off and on several times and leaving it on for a long time didn’t help.
    Doe anybody have an idea how to find the problem? Hotline of DMG doesn’t.

    Greetings

    Ksag

  2. #2
    Join Date
    Oct 2004
    Posts
    16
    I’ve had the same problem once… but I don’t know what the reason was.
    Call DMG Stuttgart/Leonberg up and talk to Mr. Bieg.
    He knows old good CTs really well.

    Good luck

    Timo

  3. #3
    Join Date
    Oct 2006
    Posts
    4

    Exclamation

    I’ve had the same problem once… but I don’t know what the reason was.
    Call DMG Stuttgart/Leonberg up and talk to Mr. Bieg.
    He knows old good CTs really well.

    Good luck

    Timo
    Hello

    Thanks for the reply.
    Meanwhile, I had to call up a technician in the company TKD-Neumuenster. The problem was quickly detected. A contactor clamped. We changed it and everything works again.
    If someone would like to know the exact description, you’re welcome to get in touch.

    KSAGE

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •