584,800 active members*
4,822 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2005
    Posts
    61
    Who has such a machine in use and can report positive or negative about it?

  2. #2
    Join Date
    Dec 2008
    Posts
    106
    Hi

    do not know if it is interesting for you, but we have a Quaser MV 184 since august the machine was delivered, installed and started up, that's it.
    Its runs at 10-16hr per load, and we have no o815 materials but Titan, Inconel, 1.4828,usw.

    The accuracies range up to DU 300 in the H6 area, I've been working on DMG and Hermle before, I still look for the differences; let’s see how it looks in 5 years....
    But for what it costs me, no matter what I give a thumbs-up. gif biggrin.gif
    If you mill a lot of aluminium then you should also order the band filter, otherwise the fine filters after the chip conveyor are blocked too quick..


    Greetings

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •